QUIDDITCH PRACTICE RINGS

Practice Broom Flying or the Hottest Game of Quidditch
Awesome Role Play Effects

  CHECK OUT - FURNITURE PLACEMENT HELP
It's BELOW close to the Bottom 

Yes you can fly the course on the Quidditch Broom from my catalog

Here are the Rings to complete your game course. Place 3 or 5 - even maybe a 100,
all for the same cost. This is for the Animated Broom available in my catalog and allows
you to set up your own Quidditch Course in any Room you want to use. Grab the Quidditch Broom and combine these two or you may have a broom of your own. LOADS of FUN !!!

Gather the crowd and show them how it is done. The flight pattern is long and completes the course that you design and layout with these rings. Place the rings along the course any place, even make them miss a ring if you desire. Suitable for ages 14 to 400! - :D Try It
 

   first in the Client Shop Window


Sorry No Refunds

Helpful Hints and Instructions     

[GRAB THE HAMMER IN YOUR ROOM]
While you use the 'Furniture Tools' in your room, use the "MOVE" tool to get the Furniture Piece as close to the area as you can. This is easier to do if you are standing close as you can to the placement. In some rooms you may have to "Drag" (force) the piece because the furniture nodes were not made into the room. Yes you can still get it there.

[FINE TUNE THE PLACEMENT]
Once you have a piece of the covering close to where you want it. Use the MOVE tool again but before you
click it hold the SHIFT Key down. It will let you fine tune the alignment to Left and Right. Play with it...
Similarly, use the CTRL Key and this will let you fine move the piece up and down.

[SCALE IT TO SIZE]
No covering enough space? Use the "SCALE" tool to Resize the piece. Not to big though. It seems to lag the room sometimes. Experiment. Once you have the piece to a good size. You can DUPLICATE that size with the "COPY" tool. This makes it so much easier that resizing each piece.

[ROTATE, SPIN, TILT and TURN]
Once in a great while, you *may* need to Rotate or even TILT a piece to align with a slated wall that doesn't want to cooperate.  Use the "ROTATE" tool by itself or try it with a combination of the Shift Key or the CTRL Keys. Play with it. You will get different effects in different rooms. If it gets really messed up while you are trying, don't get "FUSStrated" just Trash Can it and Copy another and start again.

[REMOVING OLD OBJECTS]
Have you got like a bunch of objects in the room that you are replacing or wanting out of there? Hitting the Trash Can with 40 pieces can be a real drag. Here is a slick trick for you. Go to the catalog page where you purchased the item. An easy way is to Right Click in the room you are in and Click on Products in the scene. Go to the new page that opens and double click the product. Look down toward the bottom of the catalog listing for a Big RED number. This is the product ID Number. Close that window and go back  to your room. Use the command   *REMOVE NNNNNNN    Where the NNNNNNN is the Big Red number you just found. :D   POOF-ALL OF THEM ARE GONE.  Like I said, it is for removing a bunch of one item number. Now,  don't get your girlfriend to say *REMOVE xxxxxxx  and use the Product Number of dress either, ok?  She will be really MAD - LOL

[TROUBLES ?]
Sometimes when moving a piece in a "tight" area, it may all of a sudden JUMP away and go way over there. Trash Can it if it is way off and start and new one. BUT move the Camera around to a little different position - THEN Try it again. Depending on how many animated objects or the line of sight for the camera, your piece may continually jump out and run away. Try it from a different spot.

Patience along with a trial and error session will bring a lot of good rewards. You will find out that you CAN change your rooms and make them as warm, friendly and homelike as you want them. YOU have the control with a little learning and some practice  It you get easily frustrated. - it's ok... happens tot he best of us, but remember this is supposed to be FUN. Come back and try again later :D

I have a question for YOU!

 WHO else took time to tell you all these things?

Support my products, if you please.

Creator's Notes
&
UV Maps Below

Creator's Notes & Tips:

Graphics!!!

I have used small sized graphics for the excellently LOW Kb to help reduce overall client crashing.
This also leaves you plenty of Kb Room to add your wonderful artwork and still have a light weight product.

Please note, if your color combinations are not working, adjust the Vertex On or Off as needed.
You can also adjust the "Self Illumination". Experimetn with these settings.

You may use any size graphic you wish. If you need more detail use a Larger Graphic 256x256 or 512x256, etc.  This
project may use Mapped (below) and / or Standard graphics in a 128x128 (low Res/Kb), 256x256 (normal Res/Kb) and up to 512x512 (High Res/Kb) Look closely at my "starter" textures in the Create Mode to get an idea of their layout, sizes, more... Experiment!

Most all textures are 'standard' (as in the preview pane of Create Mode except for any UV Mapped as in the below) Change as many textures as you want. I suggest you make yours unique! 

Can you use my textures on my products? YES!
Can you use my textures on other products? No.


Sample Texture Material Opacity - 
 

Please,  keep in mind, your graphics dimensions can be larger or smaller than mine.
 

Confused?  Just drop me a PM and I will respond as soon as possible.
 

You may also find handy the  " Creator's Helping Hands" It makes the avatar Stand Still for photos, etc. 

     ENJOY  
                           
                   Make Avatars Stand Still

Note: Graphics are Granted Use License for *this* project only. As always, if you have questions or need help, I am here.            

 
Presenting the
Storybook Theater


presented by
Goldilocks & Lestat